Nokia E72 Charger Not Supported Problem Solution

Nokia E72 Charger Not Supported Problem Solution
the Nokia E72 solution for charger not supported problem. This kind of charging problem shows a "charger not supported" error on the screen display when the charger is being plug-in.

To fix this problem you may first try to replace the battery and use another working charger, if the problem still exists, the solution below shows a certain components that needs to be replace if this kind of problem occurred on Nokia E72. There is thermal resistor which has a resistance value of 47K. If these resistor become faulty or already damaged it will result to charger not supported problem on the device.

The 47K BTEMP (battery temperature) resistor is located or mounted near the keypad pin connector just the bottom of the Nokia E72 PCB board. You must replace it with same value.

Nokia E72 MIC Problem Solution

Nokia E72 solution for not working MIC or microphone problem.This solution might possibly help fix and repair for a non working microphone on Nokia E72 device.

The solution below shows the connection line paths of Nokia E72 microphone circuit, which may useful for easy tracing and check up troubleshooting procedures. You may need to check the certain components that holds for microphone circuit and also trace its corresponding connection line paths for possible damaged. Read more>>

Nokia E72 LCD Display Problem with Filter IC Jumper Solution

a Nokia E72 solution for display problem such as the following:
White Screen, blue screen, blank or empty screen, garbled, saturated and blurred screen display.

If this problems occurred, you may need to try to replace or install a new LCD screen of the device,or try to restore or flash the device firmware again.These display problem may sometimes caused by a faulty LCD screen module or a corrupted device flash firmware. Only then you consider that there is something went wrong on the components on Nokia E72 PCB board.

The solution below shows the connection line paths of the LCD display circuit, which can be used for easy tracing and check up procedure on certain components or parts. Read More>>

Nokia E72 Charger Not Supported Problem Solution

the Nokia E72 solution for charger not supported problem. This kind of charging problem shows a "charger not supported" error on the screen display when the charger is being plug-in.

To fix this problem you may first try to replace the battery and use another working charger, if the problem still exists, the solution below shows a certain components that needs to be replace if this kind of problem occurred on Nokia E72. There is thermal resistor which has a resistance value of 47K. If these resistor become faulty or already damaged it will result to charger not supported problem on the device. Read more>>

Nokia e72 insert SIM card solution

Nokia E72 solution for insert SIM card problem . This solution might help fix and solved if the device unable to detect or accept any working fine sim card being inserted to it.

The solution below shows the connection line paths of the Nokia E72 SIM card pin connector which can be used as a guide for easy and quick tracing and repair procedures. You may just trace each of corresponding pin connection line paths to a corresponding components being connected to it. Read more>>

Nokia E72 MMC memory card not detected solution

a solution that may help fix and repair Nokia E72 MMC microSD memory card not detected problem. This following solution shows the memory card circuit on Nokia E72 which is very useful for quick and easy check up procedures on certain components that holds the E72 MMC circuit. Read more>>